PRODUCT DESCRIPTION

Isonit Roofcoating is based on nanopolyurethane optimized acrylic polymers which show lasting flexibility, waterrepellency, breathability, UV- resistance and fast drying.

Isonit non reflective is easy to apply, has good adhesion to the surface and provides your roof with a nice and clean look for years to come.

Isonit non reflective is specially made for roofs in a very bad condition. The specific components in Isonit non reflective, reflects the sunlight in such a way, that the surface appears homogeneous, no matter from which angle you look upon it.

USE AND APPLICATION

Before using Isonit the surface must be cleaned using Iso A-Clean and a low pressure water cleaner.

If the surface is in poor condition it is necessary to use Isonit Construction as a primer to rebuild it before painting. 
The roof must be dry and the weather stable without any forecast for rain or showers. 

Isonit is applied in 2 steps: 
1. layer diluted with up to 20% water 
2. layer of Isonit non reflective undiluted.

Isonit can be used on surfaces such as concrete, fibercement, tiles and rustprotected steel.

Recommendation: Always make a test coat to ensure the compatability of product and surface.

TECHNICAL DATA

Composition: Nanopolyurethane optimized acrylic polymers in combina­tion with UV-stable pigments. 
Colours: Black, Dark Antracite .

Density: 1,15 g/ml Dry content: appr. 50 w/w% and 45 w/v% Gloss: 5-10 – mat. Spreading rate: appr. 3-6 m²/l

Dilution: water max 20% Drying time: 1-2 hours by 20°C and 60% RH.

Repaintable: 1-6 hours

Application conditions: The temperature must be 5°C - 30 °C and max. 80% RH. Application method: brush, roller airless spray.

Cleaning: water VOC: max. 40 g/l (Cat. A/c)

Storage: Cool, but free of frost in closed containers and out the reach of children. Certified:Has passed the accelerated weatheringtest against sun and moisture ISO 11341-A:2004 with a god result.